Remove 3d printer control panel manual#
Help bubbles: When you activate this, you will get help bubbles for all fields of the manual control. Park: Moves the extruder head into parking position defined in printer settings. Stop motor: Will disable the stepper motors.
This is not supported from all boards and needs a ATX power supply. After that the host will show the coordinate in red again, assuming the move didn’t succeed.īelow the arrows you have the following buttons: So if you are at x=180 and the cube is 200 mm wide, pressing 50 mm right will only move to 200 mm.ĬAUTION: This protection works only for the arrow keys! Sending a G1 X300 would really send this to the printer. From now on, the moves are only possible inside the printer cube defined in the printer settings. After that the color turns black, telling you the position is known. Press the home button to move the extruder to its defined position.
Red means the host has no idea where the extruder really is. At the top you see the current extruder position. When you hover over the arrow, you will see a distance appear in mm, telling you how large the move will be. With the arrow keys you move the extruder in any direction. The next block controls the positioning of the extruder. If the “Easy Mode” is enabled, this field is not displayed. With the cursor up/down keys you can move through the history of manually send commands. Enter it and press return or hit the send button. The next row allows it to send any g-code command you like. At the top you see the most important printer status, so you always know what is happening. When you turn your printer on, you will often come to this tab.
0 kommentar(er)
